Access Point HLMX-APT-F1
Hosting the LiFiMAX® Controller, the LiFiMAX® Access point makes the bridge between your LAN and its LiFi extension.
It drives up to 6 Photonic Antennas (HLMX-ANT-F1) that establish the optical link with the receivers (HLMX-DON-F1).
Several Access Points can be connected to expand the coverage area and to accommodate unique configurations as needed.
TOTAL SECURITY
Light-based transmission protects your signal from being detected, jammed nor hacked. Coupled with 802.1X security, your wireless access is as secure as ever.
MAX RESPONSIVENESS
An unparalleled .5ms latency that comes with upload/download speeds of up to 215mbps
EASY TO SET UP
Plug-and-play, the LiFiMAX® Access Point only requires an RJ45 connection to your LAN and PoE+ to power the entire LiFiMAX system.
EXPANDABLE
From desk to arena. Access points can be synchronized to expand coverage area virtually endlessly to or create separate access networks.
The core of your LiFi system
The Access point is the core of your LiFi system. It makes the bridge between your LAN and the LiFi connected equipment via the antennas. It translates TCP-IP signal to and from LiFi modulated signal, but can do far more such as relaying your VLAN architecture and 802.1X security policy.
Transmission
- Wavelength LED 940nm (near IR)
- Lifi standard ITU-T G-9991
- Downlink speed 215 Mbps PHY
- Uplink speed 215 Mbps PHY
- Transmission Half duplex
Security
- Data encrypt. AES 128
- LAN control VLAN management
- Access control IEEE802.1X
Interfaces
- 1 RJ45 cat 5 min for data and power
- 6 RJ45 to connect photonic antenna
- TIA/EIA 568A or 568B
- 2 RJ45 cat 5 min for synchronization
- Eth. Crossover TIA/EIA 568B
- Power supply POE (IEEE 802.3af/at/PD)
Physical specifications
- Dimension 13.7cm x 12.5cm x 3.2cm
- Weight 261g
What's in the box
- One (1) LiFiMAX Access Point
- One (1) Ceiling Mounting Kit
Standards and Safety
- CE Marking - RoHS
- IEC/EN 6100 (EMC)
- IEC 60825-1 and 60825-12 (laser class.)
- IEC/EN 62471 (eye safety)
- Protection class IP30
Installation
- Plug and Play
- Hidden or surface mounting
- 16 users max per Access Point
Power
- Power cons. POE 802.3af (12.95W)
- POE 802.3at (25.5W)
- POE+ (30W) for 6 antennas
- Power supply 48V nominal (POE, POE+)
Operation and storage conditions
- Humidity tolerance 70% (RH)
- Average ambient temp. +/- 25°C
- Operating temperature 0 to +70°C
- Storage temperature -40 to +100°C
What do I need to instal
- Wired RJ45 LAN access
- Ethernet cable Cat7